搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

手册

症状

Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The blade turns steadily, but wood cuts slowly, burns, or needs heavy feed pressure.
The saw or pack smokes, leaks, sparks, melts, smells burned, swells, vents, or hisses.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
The front hand guard, front or rear handle, main housing, ribbed bumper, fastener, battery well, or another external part is cracked, loose, or missing.
The guide bar cannot be withdrawn from the kerf, the chain is trapped, or the workpiece closes on the saw.
The lithium battery or charger shows abnormal heat, swelling, cracking, electrolyte, hissing, odor, sparks, or smoke.
The saw makes new grinding, clacking, rattling, or strong vibration during no-load running or cutting.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
底座可以設定角度，但喺斜切桿鎖定後會移動或切割時漂移。
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
Bilah meninggalkan garis, melentur berlebihan, melengkung, atau patah selama potongan yang terkendali.
Das Ladegerät startet oder beendet den Ladevorgang nicht oder seine grüne Anzeige verhält sich nicht normal.
The lock-off or trigger will not move freely, does not return, responds intermittently, or the motor continues after the trigger is released.
Forward or reverse will not engage, or the center position will not lock the trigger.
The saw chain leaves the guide-bar groove, hangs from the bar, or comes off the drive sprocket.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.

故障模式

part