搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

症状

Charger green LED stays on
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
Unit shuts off abruptly
BATTERY WILL NOT CHARGE
battery唔會完全滑入手柄、鎖定、保持或正常釋放。
Tool or battery becomes abnormally hot, smells hot, or repeats heat shutdown after light use.
Pakiet nie ładuje się lub lampka ładowarki pozostaje wyłączona lub pokazuje nienormalny czerwony wzór.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
Narzędzie, akumulator lub ładowarka nagrzewa się nadmiernie lub ochrona wielokrotnie zatrzymuje pracę.
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
With no fastener load, the bare or correctly fitted output sounds harsh, binds, knocks, or shakes abnormally.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
The motor can be heard, but the front output remains still in both directions with the bit removed.
Motosega morta con pacco carico
Il serbatoio contiene olio ma la catena rimane asciutta, il primer non dà risultati visibili o il percorso dell'olio della barra rimane asciutto.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.

故障模式

part