搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

症状

Battery becomes unusually hot during an otherwise normal charge
A room-temperature battery seated in a proven compatible ventilated charger becomes markedly hotter than a known-good comparable battery during a normal stationary charge, without smoke, swelling or melting.
Battery loses charge rapidly while stored disconnected
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
BATTERY SEATS BUT WILL NOT STAY LATCHED
BATTERY WILL NOT SLIDE FULLY INTO A COMPATIBLE TOOL OR CHARGER
Drifttiden är mycket kortare än en matchad känd god battery
The battery shows a credible high charge or has just completed a proven charge, remains fully latched and still gives no response in a known-good compatible tool while stationary.
The battery is cool and dry but the outer shell is cracked, split, punctured, missing a piece, or open at a seam, with no smoke, liquid, swelling, odor or dangerous heat.
A proven compatible charger gives its normal full-charge indication, yet the removed battery shows little or no charge and can run a known-good low-load tool only briefly or not at all.
After a normal full charge, the battery delivers usable power but substantially less work than a comparable known-good pack in the same tool, task and conditions.
The battery reaches the normal seated position, but the release latch does not retain it and the pack can slide away without pressing the release button.
With the battery removed from every tool and charger, the charge-status button cannot be pressed normally, remains depressed or has broken away.
A known-good compatible charger begins its normal charging cycle, but the cycle repeatedly stops, restarts, faults, or continues abnormally without reaching completion.
After a normal full charge, the battery loses a large amount of indicated charge or usable low-load runtime while stored by itself in a cool, dry place.
One or more green charge-status segments stay on, stay missing, or report an implausible level even though the battery charges and delivers normal low-load runtime.
The GBA18V40 starts onto the receiver rails but binds before reaching the normal seated and latched position.
A compatible charger continues to report its temperature-delay state after the battery has stabilized at room temperature and the charger works normally with another compatible battery.
The charge-status button travels and returns normally, the pack has completed a normal charge in a known-good compatible charger, but no green segment lights when the button is pressed.
The pack is fully seated, the release button is pressed, and the battery still cannot be slid out without excessive force.

故障模式

part