搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
A compatible-looking pack will not slide fully into the handle, click, or stay retained.
battery nie wsuwa się całkowicie do uchwytu, nie pozostaje zatrzymany lub nie zwalnia normalnie.
battery唔會完全滑入手柄、鎖定、保持或正常釋放。
The battery will not insert fully, click into place, remain retained, or release normally.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The motor can be heard, but the front output remains still in both directions with the bit removed.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
Dengan tuas penjepit berfungsi, bilah yang benar tidak dapat masuk sepenuhnya atau gagal uji tarik tangan.
Blatt bleibt nicht geklemmt
The quick-release collar binds, will not move fully forward, or stays forward after release.
360度塵口塞住或者鬆脫，或者兼容嘅喉管/接頭唔會保持連接。
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
Chuck clicks while tightening
Narzędzie, akumulator lub ładowarka nagrzewa się nadmiernie lub ochrona wielokrotnie zatrzymuje pracę.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
Charger green LED stays on
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
Unit shuts off abruptly
FM-07: BATTERY唔能滑入、就位或卡住
FM-02: FM-02 BATTERY WILL NOT SEAT, LATCH, OR RELEASE
FM-02: FM-02 BATTERY 唔會坐好、鎖定或釋放
fm-1-1: FM-01 THE DRILL WILL NOT START WITH A CHARGED KNOWN-GOOD BATTERY
fm-2-1-2: Fm-07 鋸片唔能插入或保持固定
FM-09: FM-09 鑽頭滑動或唔會保持夾緊
FM-10: FM-10 A SECURED BIT SLIPS, WOBBLES, OR RUNS OUT AT NO LOAD
FM-02: 电池组无法安装、锁定或释放
fm-3-2: CHARGE-STATUS INDICATOR GIVES NO RESPONSE AFTER A CONFIRMED FULL CHARGE
FM-15: FM-15 BATTERY LOSES CHARGE RAPIDLY WHILE STORED DISCONNECTED
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
fm-3-1: FM-07 LA GUIDA, LA CATENA O IL COPRIPIGNONE NON SI INSTALLANO O NON SI POSIZIONANO CORRETTAMENTE
FM-05: Se la sega resta spenta con alimentazione provata e comandi liberi, lasciare l'involucro
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-02: FM-02 BATTERY 唔會坐好、鎖定或釋放
FM-06: HOT/COLD DELAY REMAINS AFTER THE PACK RETURNS TO ROOM TEMPERATURE
FM-07: 已卡住嘅battery無法鬆開
FM-12: FM-12 鑽頭卡住、卡死或扭轉電鑽
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-21: FM-21 Barra guida, catena della sega, custodia o accessorio di taglio danneggiati