搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
按住電量按鈕喺室溫下冇LED指示。
Charger green LED flashes
Bit jams or drill stalls
Smoke, liquid, swelling, or major damage
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
At no load the motor starts, but speed has a dead band, surges, cuts out, or ignores trigger pressure.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
LED 작업등이 켜지지 않거나 비정상적으로 켜져 있음
工具完全死機 - 無LED或MOTOR
已裝入充電電池包，但扳機無工作燈、motor聲音或鐵砧動作。
Charger green LED stays on
No LED or motor response
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
Round bit will not grip
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The motor can be heard running, but the chuck is stationary or does not rotate normally.
The torque collar binds, will not stay on a setting, or the clutch slips or locks at every position.
Trigger speed changes
Unit shuts off abruptly
Il serbatoio contiene olio ma la catena rimane asciutta, il primer non dà risultati visibili o il percorso dell'olio della barra rimane asciutto.
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-20: FM-20 CHUCK ROTATES, BUT IMPACT ACTION IS ABSENT UNDER LOAD
FM-01: FM-01: No LED or motor response Prove charge, seating, center-lock position, contacts, and trigger through FM-01
FM-13: FM-13 LED DOES NOT LIGHT OR FLICKERS
FM-05: Se la sega resta spenta con alimentazione provata e comandi liberi, lasciare l'involucro
FM-03: FM-03 THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
FM-02: FM-02 THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
FM-04: FM-04 RUNTIME IS VERY SHORT OR THE TOOL SHUTS OFF ABRUPTLY
En godkänd battery laddare
Ett sortiment av drivbits
timer
מדריך זה
Charged pack
Eye protection
Known-good charged compatible pack
arbetsstycke
En arbetsklämma eller bänkskruv
En rak rundskaftad borrbits
Ett kompatibelt 12V MAX* battery paket
Coperchio del pignone
Låseknap til skinnejustering
Mango, protección o carcasa estructural
Motor o caja de engranajes
Oil reservoir or internal feed path
Tapa de aceite con bulbo cebador