symptom
Water escapes while filling, carrying, cleaning, or storing the robot.
Water escapes while filling, carrying, cleaning, or storing the robot. STEPS
此症状的含义
Water escapes while filling, carrying, cleaning, or storing the robot. STEPS
相关故障模式
包含在完整手册中
- 根本原因分析
- 所需工具
- 逐步维修流程
- 图示
- 分解图
- 维修后检查
公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。
相关症状和错误代码
Related models
Common symptoms
- Pressing CLEAN produces no light, tone, or movement.
- The charger light remains dark with the charger connected to a known live outlet.
- The charger indicates charging but does not reach solid green in the expected charging period.
- The robot runs normally but the charged battery lasts far less than a typical job.
- The robot powers down before the job is complete and gives no repeatable beep count.
- The pack will not click into the rear bay or springs loose during handling.
- The robot stops or will not proceed and reports one beep after the two-tone distress sound.
- The robot refuses to start and reports two beeps after the two-tone distress sound.
- The robot will not start, or stops after a pad falls off, and reports three beeps.