symptom
Pressing CLEAN produces no light, tone, or movement.
Pressing CLEAN produces no light, tone, or movement. STEPS
此症状的含义
Pressing CLEAN produces no light, tone, or movement. STEPS
相关故障模式
包含在完整手册中
- 根本原因分析
- 所需工具
- 逐步维修流程
- 图示
- 分解图
- 维修后检查
公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。
相关症状和错误代码
Related models
Common symptoms
- The charger light remains dark with the charger connected to a known live outlet.
- The charger indicates charging but does not reach solid green in the expected charging period.
- The robot runs normally but the charged battery lasts far less than a typical job.
- The robot powers down before the job is complete and gives no repeatable beep count.
- The pack will not click into the rear bay or springs loose during handling.
- The robot stops or will not proceed and reports one beep after the two-tone distress sound.
- The robot refuses to start and reports two beeps after the two-tone distress sound.
- The robot will not start, or stops after a pad falls off, and reports three beeps.
- The robot reports four beeps immediately after an attempted start.