FM-25: 鞋板彎曲、裂開、鬆動或者喺平工作面搖晃

底板唔能平放，明顯彎曲或者裂開，相對鋸機本體移位，或者喺已驗證平面上搖晃。

• Drop, impact, or side loading bent the shoe
• Pivot, depth guide, or fastening point is loose or damaged
• Sawdust or debris is trapped under the shoe
• Bevel or depth hardware is not locked, imitating structural looseness

1. The repaired shoe sits flat without rocking, locks securely to the saw, and supports a square straight controlled scrap cut.

1. Remove the battery and place the clean shoe on a verified flat surface without the blade touching anything.
2. Clean the shoe and inspect the plate, edges, pivot, depth guide, bevel joint, and visible fasteners for bend, crack, gap, or movement.
3. Lock the depth and bevel levers and recheck rocking, flatness, and blade-to-shoe relationship with a straightedge and square.
4. - If the shoe remains bent, cracked, loose, or unstable, do not bend it back or cut - use authorized shoe and pivot replacement/alignment service.

这是完整维修手册中所含故障排除指南的预览。

• 鞋、深度系統或斜角系統
• 主手柄、輔助手柄同保護結構
• 斜角桿、象限、指針同零點校準
• 深度桿、導向同刻度
• 鞋同結構樞軸

• 鞋板彎曲、裂開、鬆動或者喺平工作面搖晃

  底板唔能平放，明顯彎曲或者裂開，相對鋸機本體移位，或者喺已驗證平面上搖晃。

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。