FM-01: 鋸完全冇反應 - 冇工作燈同冇 Motor 反應

裝咗一個顯示有電嘅 battery，拉扳機，但工作燈冇亮，鋸片冇轉動。

• FLEXVOLT battery is discharged, protected, damaged, or not fully seated
• Battery rails or accessible contacts are dirty, wet, burned, or damaged
• Trigger lock-off is not being released
• Trigger switch, electronic module, motor, or internal power path has failed

1. With a proven pack installed, the worklight responds to trigger operation and the blade reaches normal no-load speed.

1. Set the saw on its side with the trigger released, remove the battery, and keep the blade clear of people and material.
2. - Inspect the pack, rails, latch, and accessible contacts for cracks, swelling, liquid, scorching, unusual heat, or debris - route any battery hazard to FM-06
3. Charge the pack with its designated charger, clean only dry accessible interfaces, and install a known-good fully charged compatible FLEXVOLT pack until it
4. - Press the lock-off deliberately and pull the trigger once with the blade clear of all material - if the worklight and motor both remain absent, keep the hou

这是完整维修手册中所含故障排除指南的预览。

• FLEXVOLT battery 電池組
• Battery導軌、接觸點、鎖扣同釋放
• 扳機鎖定同扳機開關
• 電子module、無刷motor同電動制動
• 工作燈同鏡片
• 電子module或無刷motor

• 鋸完全冇反應 - 冇工作燈同冇 Motor 反應

  裝咗一個顯示有電嘅 battery，拉扳機，但工作燈冇亮，鋸片冇轉動。

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。