FM-12: 鋸片卡住、停轉或者鋸反彈

鋸片夾住、卡喺切口、鋸機反彈或唔能安全重啟。

• Workpiece support lets the kerf close on the blade
• Blade is dull, damaged, dirty, or installed incorrectly
• Depth or bevel lever is loose or set incorrectly
• Saw is twisted, forced, or restarted in the kerf
• Fastener, knot, or offcut pinches the blade

1. The saw completes a supported cut without binding, stalling, or kickback.

1. Release the trigger and hold the saw still in the kerf.
2. Wait for a complete stop, remove the battery, then free and support the workpiece correctly.
3. Check blade condition, direction, depth, bevel locks, and the cut path for obstructions.
4. Restart only with the blade centered and teeth clear, then verify a controlled supported cut.

这是完整维修手册中所含故障排除指南的预览。

• 斜角桿同刻度盤
• 切口導向同導軌槽
• 深度桿同底板
• 深度、斜角或鞋組件
• 圓鋸片

• 鋸片卡住、停轉或者鋸反彈

  鋸片夾住、卡喺切口、鋸機反彈或唔能安全重啟。

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。