FM-24: 自動主軸鎖唔會固定夾頭

FM-24

• Spindle has not reached the lock position
• Gear train is between teeth and needs slight hand rotation
• Spindle-lock or gearbox component is worn or broken
• Chuck body is loose on the spindle

1. The spindle lock holds the empty chuck for normal hand tightening and loosening, or the lock fault is proven.

1. Inspect for a loose chuck body, unusual free play, or grinding while keeping the tool unpowered.
2. If the spindle never locks or the chuck body is loose, route the chuck, spindle lock, gearbox, or spindle to service.
3. Remove the battery and test the spindle lock only with an empty chuck.
4. Turn the chuck gently through a small angle, then retry the sleeve so the internal lock can engage.

这是完整维修手册中所含故障排除指南的预览。

• 拆除battery並且夾頭空置時，轉動套筒會令主軸同motor自由轉動，而唔係提供足夠鎖力用手緊或鬆夾頭。

  拆咗battery，夾頭空置，轉動套筒會 1. 拆除battery，淨係用空夾頭測試主軸鎖。

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

公开页面仅显示预览。购买完整手册以下载全部维修步骤、图示和验证流程。