Tìm hướng dẫn sửa chữa

Tìm hướng dẫn sửa chữa, sách hướng dẫn, triệu chứng và mã lỗi trong cơ sở kiến thức.

Model

Hướng dẫn

Triệu chứng

The motor can be heard, but the front output remains still in both directions with the bit removed.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
Không có đèn LED hoặc phản hồi motor
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
BATTERY HOẶC BỘ SẠC KHÔNG BẮT ĐẦU HOẶC HOÀN THÀNH QUÁ TRÌNH SẠC
BATTERY KHÔNG LẮP ĐÚNG, KHÓA, THẢ RA HOẶC GIỮ CHẶT
NO WORKLIGHT OR MOTOR RESPONSE
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
Mũi khoan bị kẹt, motor bị đứng máy, hoặc máy khoan xoay mạnh trong tay khi làm việc.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
At no load the motor starts, but speed has a dead band, surges, cuts out, or ignores trigger pressure.
With a charged pack installed and direction selected, the trigger produces no light, sound, or anvil movement.

Chế độ lỗi

part