FM-01: OTURMUŞ PAKETLE GÖSTERGE VEYA ŞARJ TEPKİSİ YOK

FM-01 OTURMUŞ PAKETLE GÖSTERGE VEYA ŞARJ TEPKİSİ YOK

• Outlet is dead, switched off, or unsuitable
• Plug or cord is loose, stressed, or damaged
• Battery is not actually seated or contacts are dirty
• Battery pack is faulty or outside temperature limits
• Internal charger power or control fault

1. A fully seated known-good pack starts a normal red-blinking charge, or the persistent charger failure is conclusively routed to authorized service or replacement.

1. Let the pack reach room temperature, dry-clean only the external rails and contacts, and insert it fully until retained.
2. Test a second known-good compatible pack in the DCB115 and, when available, test the original pack in a known-good compatible charger.
3. Prove the wall outlet with a known-good lamp or appliance, then plug the charger directly into the correct outlet without a questionable strip or extension.
4. If the DCB115 remains dark with a proven outlet and known-good pack, stop owner work and have the complete charger serviced or replaced.

Bu, tam onarım kılavuzunda yer alan sorun giderme rehberinin bir önizlemesidir.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Herkese açık sayfalar yalnızca önizleme gösterir. Eksiksiz onarım adımları, diyagramlar ve doğrulama prosedürlerini indirmek için tam kılavuzu satın alın.