failure mode
FM-21: KAVRAMA ERKEN SERBEST BIRAKIYOR VEYA MATKAP MODUNDA KAYIYOR
FM-22
Tanı özeti
FM-22
Olası Kök Nedenler
- Numbered setting is too low for the fastener
- Collar is between detents or drill mode is not fully aligned
- Bit, fastener, or material is causing abnormal resistance
- Clutch spring, cam, gear, or drive interface is worn or broken
Hızlı Kontroller
- The clutch releases only at the selected driving torque and stays engaged in drill mode, or the early-release fault is proven.
Onarım Önizlemesi
- Increase the numbered setting gradually for driving, or retest once in fully aligned drill mode without forcing the tool.
- If it still releases too early at suitable settings or slips in drill mode, route the clutch and gearbox to service.
- Release the trigger at early ratcheting, remove the battery, and verify the collar is fully aligned with a detent or drill mode.
- Fit a sound correct bit, secure suitable scrap material, and choose range 1 for driving or the proper range for drilling.
Bu, tam onarım kılavuzunda yer alan sorun giderme rehberinin bir önizlemesidir.
İlgili belirtiler
Yaka normal hareket eder, ancak kavrama uygun ayarlarda normal derinliğe ulaşmadan önce tıkırdar veya matkap modu doğru seçildiğinde sesli olarak kayar.
Yaka normal hareket eder, ancak kavrama uygun 1. Erken tıklamada tetik bırakın, battery çıkarın ve yakayı tıklama veya matkap moduyla tam hizalanmış doğrulayın.
Tam kılavuza dahil
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Herkese açık sayfalar yalnızca önizleme gösterir. Eksiksiz onarım adımları, diyagramlar ve doğrulama prosedürlerini indirmek için tam kılavuzu satın alın.