failure mode
FM-17: İKİ HIZ SEÇİCİSİ VİTESLER ARASINDA HAREKET ETMİYOR
CRAFTSMAN CMCD700C1 V20 1/2 İNÇ MATKAP/SÜRÜCÜ KİTİ - FIRÇALI MOTOR - 2 HIZ - ANAHTARSIZ MANDREN - LED
Tanı özeti
CRAFTSMAN CMCD700C1 V20 1/2 İNÇ MATKAP/SÜRÜCÜ KİTİ - FIRÇALI MOTOR - 2 HIZ - ANAHTARSIZ MANDREN - LED
Olası Kök Nedenler
- Gear teeth are temporarily misaligned
- Debris or housing damage blocks selector travel
- External selector cap or fork is damaged
- Internal shift fork or gearbox component is jammed
Hızlı Kontroller
- The selector reaches and holds both ranges with the chuck stopped, or the shift mechanism is routed to service.
Onarım Önizlemesi
- Turn the empty chuck slightly by hand while moving the selector gently into range 1 and then range 2.
- If it still will not reach both positions, keep the tool unpowered and route the selector fork or gearbox to service.
- Stop the chuck completely and remove the battery before touching the speed selector.
- Dry-clean around the selector and inspect the cap and housing for cracks, looseness, or obstruction.
Bu, tam onarım kılavuzunda yer alan sorun giderme rehberinin bir önizlemesidir.
İlgili belirtiler
Mandren durduğunda ve battery çıkarıldığında, üst seçici dişliler hizalansa bile vites 1 veya 2'ye tam hareket ettirilemez.
Mandren durduğunda ve battery çıkarıldığında, üst seçici 1. Mandreni tamamen durdurun ve hız seçicisine dokunmadan önce battery çıkarın.
Tam kılavuza dahil
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Herkese açık sayfalar yalnızca önizleme gösterir. Eksiksiz onarım adımları, diyagramlar ve doğrulama prosedürlerini indirmek için tam kılavuzu satın alın.