FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START

The worklight turns on when the trigger is pressed, but the motor does not start and the chuck does not rotate.

• Direction button is not fully engaged
• Tool or pack remains in heat protection
• Chuck or internal drive is mechanically jammed
• Trigger output, brushes, motor, or wiring has failed

1. Trigger use starts the motor and chuck whenever the worklight responds.

1.

Bu, tam onarım kılavuzunda yer alan sorun giderme rehberinin bir önizlemesidir.

• The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.

  The trigger lights the work area, but the motor stays 1. Release trigger, remove the pack and bit, and let tool and pack cool.

• WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START

  FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT FM-09 POWER CUTS OUT WHEN THE PACK OR TOOL IS

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Herkese açık sayfalar yalnızca önizleme gösterir. Eksiksiz onarım adımları, diyagramlar ve doğrulama prosedürlerini indirmek için tam kılavuzu satın alın.