Поиск руководств по ремонту

Найдите руководства, мануалы, симптомы и коды ошибок во всей базе знаний.

Руководства

Симптомы

The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
battery при комнатной температуре, установленный в проверенное совместимое вентилируемое зарядное устройство, становится заметно горячее, чем исправный сопоставимый battery во время нормальной стационарной зарядки, без дыма, вздутия или плавления.
Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.
Den löpande sågen hoppar, vibrerar mot arbetsstycket, fastnar eller sparkar bakåt eller åt sidan.
Il serbatoio contiene olio ma la catena rimane asciutta, il primer non dà risultati visibili o il percorso dell'olio della barra rimane asciutto.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
With the bit removed, the driver makes continuous abnormal grinding, knocking, or scraping.
BATTERY WILL NOT CHARGE
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
Efter att avtryckaren släppts fortsätter bladet att slå märkbart längre än normalt.
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
NO WORKLIGHT OR MOTOR RESPONSE
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.

Режимы неисправностей