Поиск руководств по ремонту

Найдите руководства, мануалы, симптомы и коды ошибок во всей базе знаний.

Модели

Руководства

Симптомы

Med klämspaken fungerande går ett korrekt blad inte i helt eller klarar handdragstest.
Klemmen vil ikke bevege seg
battery nie wsuwa się całkowicie do uchwytu, nie pozostaje zatrzymany lub nie zwalnia normalnie.
Wiertarka działa stabilnie, ale wierci wolno lub nie może wkręcić normalnego elementu mocującego przy prawidłowym ustawieniu.
Bladet lämnar linjen, böjs överdrivet, böjs eller går av under en annars kontrollerad skärning.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The drill stops early or gives far less runtime than expected without unusual heat.
The charger green LED does not flash, never becomes steady, or the battery remains discharged.
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The battery will not slide in, click into place, release, or remain secure in the handle.
The chuck jaws bind, will not release a bit, close unevenly, or cannot grip a straight round shank.
The torque collar binds, will not stay on a setting, or the clutch slips or locks at every position.
The chuck, housing, handle, battery mount, labels, or vents are loose, cracked, obstructed, or damaged.
The drill or battery becomes rapidly or severely hot, or little cooling air can move through the tool vents.
The bit jams, the motor stalls, or the drill twists sharply in the hands during work.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.

Режимы неисправностей

part