Поиск руководств по ремонту

Найдите руководства, мануалы, симптомы и коды ошибок во всей базе знаний.

Модели

Руководства

Симптомы

Den löpande sågen hoppar, vibrerar mot arbetsstycket, fastnar eller sparkar bakåt eller åt sidan.
Skon svänger inte fritt, är böjd eller lös, eller sitter inte fast mot arbetsstycket.
The guide bar steers sideways in the cut or the kerf curves even though the workpiece is supported and the saw is held square.
The drill makes abnormal grinding or knocking, vibrates strongly, or the chuck and spindle have play.
motor слышно, как он работает, но патрон неподвижен или не вращается нормально.
Sågen, battery eller laddare blir onormalt varm eller stängs av upprepade gånger efter uppvärmning
The saw makes new grinding, clacking, rattling, or strong vibration during no-load running or cutting.
The guide bar cannot be withdrawn from the kerf, the chain is trapped, or the workpiece closes on the saw.
The LED work light does not light or stays on abnormally
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The saw cuts slowly, makes fine dust instead of chips, chatters in the kerf, or must be pushed hard despite judging sharpness.
THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The motor can be heard, but the front output remains still in both directions with the bit removed.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.
After chain or bar work, the cover will not sit flush, the bar will not align, or the locking knob cannot begin correctly.
Klemmen vil ikke bevege seg
Med klämspaken fungerande går ett korrekt blad inte i helt eller klarar handdragstest.

Режимы неисправностей

part