Поиск руководств по ремонту
Найдите руководства, мануалы, симптомы и коды ошибок во всей базе знаний.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
No LED or motor response
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
Bit jams or drill stalls
The battery will not slide in, click into place, release, or remain secure in the handle.
Smoke, liquid, swelling, or major damage
Unit shuts off abruptly
Trigger speed changes
Charger green LED flashes
The LED work light does not light or stays on abnormally
Round bit will not grip
The drill makes abnormal grinding or knocking, vibrates strongly, or the chuck and spindle have play.
Charger green LED stays on
FM-01: Нет светодиода или отклика motor Проверьте заряд, посадку, положение центрального замка, контакты и курок через FM-01
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-03: FM-03 BATTERY ИЛИ ЗАРЯДНОЕ УСТРОЙСТВО НЕ НАЧИНАЕТ ИЛИ НЕ ЗАВЕРШАЕТ ЗАРЯДКУ
FM-04: FM-04 ВРЕМЯ РАБОТЫ ОЧЕНЬ КОРОТКОЕ ИЛИ ИНСТРУМЕНТ ВНЕЗАПНО ВЫКЛЮЧАЕТСЯ
FM-14: FM-14 ПАТРОН, КОРПУС, РУЧКА, КРЕПЛЕНИЕ BATTERY ИЛИ ВЕНТИЛЯЦИЯ ПОВРЕЖДЕНЫ
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-08: FM-08 ЗАЖИМНЫЕ КУЛАКИ БЕЗКЛЮЧЕВОГО ПАТРОНА НЕ ОТКРЫВАЮТСЯ, НЕ ЗАКРЫВАЮТСЯ, НЕ ОСВОБОЖДАЮТСЯ ИЛИ НЕ ЗАХВАТЫВАЮТ
FM-02: FM-02 BATTERY НЕ ВСТАЁТ НА МЕСТО, НЕ ЗАЩЁЛКИВАЕТСЯ, НЕ ОСВОБОЖДАЕТСЯ ИЛИ НЕ ОСТАЁТСЯ ЗАКРЕПЛЁННЫМ
FM-15: FM-15 ИНСТРУМЕНТ ИЛИ BATTERY ПЕРЕГРЕВАЕТСЯ ИЛИ ВОЗДУШНЫЙ ПОТОК ОХЛАЖДЕНИЯ ЗАБЛОКИРОВАН
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-05: FM-05 КУРК ЗАЕДАЕТ, РАБОТАЕТ ПОСЛЕ ОТПУСКАНИЯ ИЛИ ОТКЛИК НА СКОРОСТЬ НЕБЕЗОПАСЕН
FM-10: FM-10 MOTOR работает, но патрон не вращается
FM-07: FM-07 КОЛЬЦО МОМЕНТА НЕ ДВИЖЕТСЯ, НЕ УДЕРЖИВАЕТСЯ ИЛИ НЕ КОНТРОЛИРУЕТ ПРОСКОЛ КЛАЧА
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
Зажим для работы или тиски
Одобренное зарядное устройство для battery
Совместимый 12V MAX* аккумуляторный блок battery
Прямая сверло с круглым хвостовиком
Мягкий сухой brush
заготовка
Это руководство
таймер
Набор бит для отвертки
Known-good charged compatible pack
Charged pack
Eye protection
Бита для отвертки или держатель бит
Воротник режима или крутящего момента
Съёмный 20V МАКС* battery
Совместимый battery
Встроенный держатель бит
Зарядное устройство и индикатор
Курок с переменной скоростью
Холодный заряженный исправный battery