Поиск руководств по ремонту
Найдите руководства, мануалы, симптомы и коды ошибок во всей базе знаний.
NO WORKLIGHT OR MOTOR RESPONSE
No LED or motor response
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
With a charged pack installed and direction selected, the trigger produces no light, sound, or anvil movement.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
motor слышно, как он работает, но патрон неподвижен или не вращается нормально.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
Smoke, liquid, swelling, or major damage
Bit jams or drill stalls
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
Den löpande sågen hoppar, vibrerar mot arbetsstycket, fastnar eller sparkar bakåt eller åt sidan.
Charger green LED flashes
Round bit will not grip
Trigger speed changes
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-01: Нет светодиода или отклика motor Проверьте заряд, посадку, положение центрального замка, контакты и курок через FM-01
fm-p13-b-17e1d6d1: Lås- eller triggerknapp fastnar, rör sig inte fullt, startar
FM-10: FM-10 MOTOR работает, но патрон не вращается
FM-04: FM-04 ВРЕМЯ РАБОТЫ ОЧЕНЬ КОРОТКОЕ ИЛИ ИНСТРУМЕНТ ВНЕЗАПНО ВЫКЛЮЧАЕТСЯ
FM-14: FM-14 SLAG UTAN LAST MALER, SLÅR, FASTNAR ELLER VIBRERAR
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-16: FM-16 IMMEDIATE BATTERY, CHARGER, LIQUID, OR STRUCTURAL HAZARD
FM-01: Fm-01 锯无刀片行程响应
FM-02: FM-02 Le BATTERY ne s'enclenche pas, ne se verrouille pas ou ne se libère pas
FM-09: FM-09 SVÄNGANDE SKO ÄR BÖJD, LÖS ELLER SVÄNGER INTE
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-05: FM-05 КУРК ЗАЕДАЕТ, РАБОТАЕТ ПОСЛЕ ОТПУСКАНИЯ ИЛИ ОТКЛИК НА СКОРОСТЬ НЕБЕЗОПАСЕН
FM-15: FM-15 ИНСТРУМЕНТ ИЛИ BATTERY ПЕРЕГРЕВАЕТСЯ ИЛИ ВОЗДУШНЫЙ ПОТОК ОХЛАЖДЕНИЯ ЗАБЛОКИРОВАН
FM-03: FM-03 BATTERY ИЛИ ЗАРЯДНОЕ УСТРОЙСТВО НЕ НАЧИНАЕТ ИЛИ НЕ ЗАВЕРШАЕТ ЗАРЯДКУ
Motor o caja de engranajes
Зажим для работы или тиски
Charged pack
Eye protection
Known-good charged compatible pack
заготовка
Это руководство
таймер
Набор бит для отвертки
Одобренное зарядное устройство для battery
Совместимый 12V MAX* аккумуляторный блок battery
Прямая сверло с круглым хвостовиком
зажимы
Холодный заряженный исправный battery
Mango, protección o carcasa estructural
Funda para barra guía
Бита для отвертки или держатель бит
Воротник режима или крутящего момента
Совместимый battery
Встроенный держатель бит