Поиск руководств по ремонту

Найдите руководства, мануалы, симптомы и коды ошибок во всей базе знаний.

Модели

Руководства

Симптомы

Efter att avtryckaren släppts fortsätter bladet att slå märkbart längre än normalt.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
battery nie wsuwa się całkowicie do uchwytu, nie pozostaje zatrzymany lub nie zwalnia normalnie.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
The LED work light does not light or stays on abnormally
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
The chuck jaws bind, will not release a bit, close unevenly, or cannot grip a straight round shank.
THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The battery will not slide in, click into place, release, or remain secure in the handle.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
At no load the motor starts, but speed has a dead band, surges, cuts out, or ignores trigger pressure.
With the bit removed, the driver makes continuous abnormal grinding, knocking, or scraping.

Режимы неисправностей

part