symptom
The pad card stops short, binds, or will not remain seated in both underside rails.
The pad card stops short, binds, or will not remain seated in both STEPS
Что означает этот симптом
The pad card stops short, binds, or will not remain seated in both STEPS
Связанные режимы неисправностей
Включено в полное руководство
- Анализ первопричины
- Необходимые инструменты
- Пошаговая процедура ремонта
- Схемы
- Разнесённые виды
- Проверки после ремонта
На публичных страницах показан только предпросмотр. Купите полное руководство, чтобы скачать все шаги, схемы и процедуры проверки.
Связанные симптомы и коды ошибок
Related models
Common symptoms
- Pressing CLEAN produces no light, tone, or movement.
- The charger light remains dark with the charger connected to a known live outlet.
- The charger indicates charging but does not reach solid green in the expected charging period.
- The robot runs normally but the charged battery lasts far less than a typical job.
- The robot powers down before the job is complete and gives no repeatable beep count.
- The pack will not click into the rear bay or springs loose during handling.
- The robot stops or will not proceed and reports one beep after the two-tone distress sound.
- The robot refuses to start and reports two beeps after the two-tone distress sound.
- The robot will not start, or stops after a pad falls off, and reports three beeps.