FM-08: FM-08 BATTERY становится аномально горячим без дыма, искр, протечек или вздутия

battery быстро становится аномально горячим во время зарядки, хранения или использования инструмента без дыма, искр, протечек или набухания.

• The tool or work is stalled, overloaded, or binding
• Charging or use occurred in a hot environment with poor ventilation
• Dirty or resistive contacts are generating heat
• The pack has an internal cell, conductor, or protection defect
• The charger or tool is driving an abnormal condition

1. The corrected system remains only normally warm under a light test, or the suspect pack is removed from service before an active event develops.

1. Stop use or charging immediately, remove the battery only if it is safe to handle, and place the stable pack on a clear noncombustible surface away from people and ignition sources.
2. 1.

Это предпросмотр руководства по устранению неисправностей из полного руководства по ремонту.

• Невоспламеняющаяся чистая поверхность

• The pack becomes rapidly or painfully hot during charging, storage, or ordinary tool use, but no active venting, flame, leakage, or visible swelling is present.

  The pack becomes rapidly or painfully hot during charging, storage, or ordinary tool Stop use or charging immediately, remove the battery only if it is safe to handle, and place the stable pack on a clear FM-08

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

На публичных страницах показан только предпросмотр. Купите полное руководство, чтобы скачать все шаги, схемы и процедуры проверки.