symptom
No motor or chuck response
FM-01 DRILL HAS NO MOTOR OR CHUCK RESPONSE FM-14 DRILL GRINDS OR VIBRATES AT NO LOAD
Что означает этот симптом
FM-01 DRILL HAS NO MOTOR OR CHUCK RESPONSE FM-14 DRILL GRINDS OR VIBRATES AT NO LOAD
Связанные режимы неисправностей
Включено в полное руководство
- Анализ первопричины
- Необходимые инструменты
- Пошаговая процедура ремонта
- Схемы
- Разнесённые виды
- Проверки после ремонта
На публичных страницах показан только предпросмотр. Купите полное руководство, чтобы скачать все шаги, схемы и процедуры проверки.
Связанные симптомы и коды ошибок
Related models
Common symptoms
- A charged, latched battery and normal trigger command produce no chuck rotation.
- The battery will not slide fully into the handle, stay retained, or release normally.
- The pack will not charge, or the charger light stays off or shows an abnormal red pattern.
- The cool drill begins to run, then stops during a brief no-load test or light work.
- The trigger binds, fails to return, starts unpredictably, or no-load speed surges.
- Forward or reverse will not engage, or the center position will not lock the trigger.
- The collar will not align or hold, or screwdriving clutch cut-off is absent or premature.
- The chuck sleeve will not turn enough to move the jaws or admit a normal straight bit.
- The chuck opens and closes, but the bit slips, pulls out, or ejects during normal work.