failure mode
FM-17: SELECTORUL CU DOUĂ VITEZE NU SE MIȘCĂ ÎNTRE TREPTE
CRAFTSMAN CMCD700C1 V20 SET BURGHIU/ȘURUBELNIȚĂ DE 1/2 INCH - MOTOR PERIAT - 2 VITEZE - MANDRINĂ FĂRĂ CHEIE - LED
Prezentare generală diagnostic
CRAFTSMAN CMCD700C1 V20 SET BURGHIU/ȘURUBELNIȚĂ DE 1/2 INCH - MOTOR PERIAT - 2 VITEZE - MANDRINĂ FĂRĂ CHEIE - LED
Cauze probabile
- Gear teeth are temporarily misaligned
- Debris or housing damage blocks selector travel
- External selector cap or fork is damaged
- Internal shift fork or gearbox component is jammed
Verificări rapide
- The selector reaches and holds both ranges with the chuck stopped, or the shift mechanism is routed to service.
Previzualizare reparație
- Turn the empty chuck slightly by hand while moving the selector gently into range 1 and then range 2.
- If it still will not reach both positions, keep the tool unpowered and route the selector fork or gearbox to service.
- Stop the chuck completely and remove the battery before touching the speed selector.
- Dry-clean around the selector and inspect the cap and housing for cracks, looseness, or obstruction.
Aceasta este o previzualizare a ghidului de depanare inclus în manualul complet de reparație.
Simptome asociate
Cu mandrina oprită și battery îndepărtat, selectorul superior nu poate fi mutat complet în intervalul 1 sau 2, chiar și după ce mandrina este rotită manual pentru alinierea dinților.
Cu mandrina oprită și battery îndepărtat, selectorul superior 1. Opriți complet mandrina și îndepărtați battery înainte de a atinge selectorul de viteză.
Inclus în manualul complet
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Paginile publice afișează doar o previzualizare. Cumpără manualul complet pentru a descărca pașii completi de reparație, diagramele și procedurile de verificare.