수리 가이드 검색
지식 베이스에서 수리 가이드, 매뉴얼, 증상 및 오류 코드를 찾으세요.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
Bit jams or drill stalls
The battery will not slide in, click into place, release, or remain secure in the handle.
Smoke, liquid, swelling, or major damage
Unit shuts off abruptly
LED 또는 motor 반응 없음
Trigger speed changes
Charger green LED flashes
LED 작업등이 켜지지 않거나 비정상적으로 켜져 있음
Round bit will not grip
The drill makes abnormal grinding or knocking, vibrates strongly, or the chuck and spindle have play.
Charger green LED stays on
FM-01: LED 또는 motor 반응 없음 FM-01: 충전, 장착, 중앙 잠금 위치, 접점 및 트리거 확인
FM-03: FM-03 BATTERY 또는 충전기가 충전을 시작하거나 완료하지 못함
FM-04: FM-04 작동 시간이 매우 짧거나 도구가 갑자기 꺼짐
FM-14: FM-14 척, 하우징, 핸들, BATTERY 마운트 또는 통풍구가 손상됨
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-08: FM-08 키리스 척 조가 열리지 않거나 닫히지 않거나 해제되지 않거나 잡지 못함
FM-02: FM-02 BATTERY가 자리잡지 않거나 걸쇠되지 않거나 해제되지 않거나 고정되지 않음
FM-15: FM-15 도구 또는 BATTERY가 과열되거나 냉각 공기 흐름이 차단됨
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-05: FM-05 트리거가 걸리거나 계속 작동하거나 속도 반응이 안전하지 않음
FM-10: FM-10 MOTOR는 작동하지만 척이 회전하지 않음
FM-07: FM-07 토크 칼라가 움직이지 않거나 유지되지 않으며 클러치 미끄럼을 제어하지 못함
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG