수리 가이드 검색
지식 베이스에서 수리 가이드, 매뉴얼, 증상 및 오류 코드를 찾으세요.
A straight bit or the empty chuck shows repeatable side-to-side runout at low no-load speed after the bit has been centered and tightened correctly.
The tool starts and runs at no load, but stops abruptly on an ordinary fastener with no jam or twist.
잠긴 봉투-포트 접합부에서 먼지 누출 발생
No-load operation is smooth, but the saw bounces, chatters, or vibrates as soon as cutting begins.
The blade pinches or stalls in the kerf, or the saw reacts backward during a cut.
With the blade clear of material, the saw sounds slow, hunts, or repeatedly rises and falls in speed.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
360도 먼지 포트가 막히거나 느슨하거나, 호환 가능한 호스/커플러가 부착된 상태를 유지하지 못합니다.
잠긴 0도 베벨에서 정상 블레이드가 발판에 직각이 아님.
발판은 각도로 설정할 수 있지만 베벨 레버를 잠근 후 절단 중에 움직입니다.
motor와 샤프트는 회전하지만 정상 지지 절단 중 블레이드가 와셔에서 멈추거나 미끄러집니다.
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
올바른 battery가 장착되어 있지만 잠금 해제 버튼을 누르면 트리거가 motor 반응을 전혀 생성하지 않습니다.
A suitable bag or vacuum collects little dust while the port remains secure and aimed.
The saw or pack smokes, leaks, sparks, melts, smells burned, swells, vents, or hisses.
The blade turns steadily, but wood cuts slowly, burns, or needs heavy feed pressure.
FM-25: FM-25 공구가 기계적 바인딩 없이 부하 시 꺼짐
FM-25: 척 또는 비트가 무부하 상태에서 눈에 띄게 흔들림
FM-25: 잠긴 봉투-포트 접합부에서 먼지 누출 발생
FM-01: FM-01 공구가 완전히 작동하지 않음 - LED 또는 MOTOR 없음
FM-23: 비트가 척에서 미끄러지거나 빠짐
FM-04: battery가 톱에 걸려 나오지 않음
FM-24: FM-24 하부 가드가 즉시 닫히지 않음
FM-03: FM-03 BATTERY가 미끄러지지 않거나 장착되지 않음
FM-33: FM-33 먼지 포트가 회전하지 않거나 위치를 유지하지 않으며 호스를 고정하지 못함
FM-37: FM-37 하우징, 손잡이, BATTERY 레일 또는 통풍구에 균열 또는 손상 있음
FM-14: FM-14 샤프트 잠금이 작동하지 않거나 유지되지 않음
FM-34: FM-34 절단 중 블레이드가 걸리거나 멈추거나 반동함
FM-08: FM-08 무부하 속도가 약하거나 불균일하거나 급격히 변함
FM-06: FM-06 잠금 해제가 트리거를 차단하지 않거나 원위치로 돌아가지 않음
FM-36: FM-36 블레이드가 작업물에 닿을 때만 톱이 떨리거나 진동함
FM-30: FM-30 베벨이 0도로 설정된 상태에서 톱이 직각이 아님
FM-27: 깊이 레버를 조정한 후 선택한 깊이가 고정되지 않음
FM-23: 하부 가드가 리프트 레버에 저항하거나 완전히 움직이지 않음
FM-35: FM-35 블레이드는 안정적으로 회전하지만 절단이 느리거나 타거나 힘이 필요함
FM-07: FM-07 트리거가 걸리거나 MOTOR가 해제 후에도 계속 작동함