수리 가이드 검색

지식 베이스에서 수리 가이드, 매뉴얼, 증상 및 오류 코드를 찾으세요.

매뉴얼

증상

The motor can be heard, but the front output remains still in both directions with the bit removed.
With the battery removed, the clutch collar is physically stuck, cracked, excessively loose, or unable to align a numbered setting or drill mode with the index mark.
Motor sound is present, but the anvil and installed bit remain stationary.
Der Deckel lässt sich nicht schließen, der Primer ist gespalten oder klemmt, oder die Ölstandsanzeige ist gerissen, trüb oder undicht.
The cool dry pack has a visibly cracked, missing, loose or distorted rail, release button, latch feature or molded support, whether or not insertion has been attempted.
패드가 회전할 때 비정상적인 구동 접촉 소음 발생
충전기 후면 키홀 슬롯과 하우징이 온전함에도 불구하고 battery 삽입 또는 제거 중에 충전기가 흔들리거나 미끄러지거나 screws에서 들리거나 당겨짐.
A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.
A straight bit or the empty chuck shows repeatable side-to-side runout at low no-load speed after the bit has been centered and tightened correctly.
battery가 물리적으로 래치된 상태를 유지하지만 도구 또는 battery가 일반 작업 자세로 움직일 때 motor, LED 또는 둘 다가 꺼졌다가 다시 켜짐.
battery를 제거하고 척이 비어 있는 상태에서 슬리브를 돌리면 척을 손으로 조이거나 풀기에 충분한 잠금력을 제공하지 않고 스핀들 및 motor가 자유롭게 회전합니다.
motor가 작동하는 소리는 들리지만 척은 움직이지 않거나 독립적으로 멈추거나 정상적인 구동력을 전달하지 않고 자유 회전함.
The chuck jaws open and close normally, but a straight compatible bit rotates or pulls out during moderate drilling or driving.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
The collar moves and holds a low numbered setting, but the clutch does not ratchet before a test fastener is overdriven in suitable scrap material.
The collar moves normally, but the clutch ratchets before a suitable fastener reaches normal depth at appropriate settings, or it audibly slips when drill mode is correctly selected.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
The drill sounds and rotates normally with no load, does not stall, overheat, slip, or vibrate abnormally, yet a corrected drilling or fastening task progresses much more slowly than expected.
With the battery removed, the keyless chuck sleeve or jaws remain seized, or a clamped bit cannot be released by normal hand rotation.
검증된 BATTERY로 드릴/드라이버가 시작되지 않음

고장 모드

part