FM-07: 블레이드가 흔들리거나 닿거나 진동하거나 갈림

FM-07 블레이드 흔들림, 마찰, 진동 또는 연삭

• Blade is bent, cracked, chipped, or wrong bore
• Blade, washer, or bolt is dirty or misassembled
• Blade bolt is loose
• Shoe or guard is bent into the blade path
• Spindle or bearing has side play or damage

1. A correct blade runs true, clears the guard and shoe, and produces no abnormal vibration or grinding.

1. Remove and reinstall the blade in the correct direction with clean mating surfaces, the correct outer washer, and the blade bolt securely tightened.
2. Rotate the blade by hand with the battery out and check for side rub, guard contact, a bent shoe, or spindle side play through a full revolution.
3. Perform a brief clear no-load test only if the hand check is normal; persistent wobble, grinding, or side play requires authorized spindle or bearing service.
4. Remove the battery, place the saw on a stable surface, and inspect the blade for bending, cracks, missing tips, wrong bore, or other damage; replace any suspect blade.

이것은 전체 수리 매뉴얼에 포함된 문제 해결 안내의 미리보기입니다.

• 목재 절단용 원형톱 블레이드

• The blade runs off-center, touches the guard or shoe, produces unusual vibration, or makes a grinding sound.

  The blade runs off-center, touches the guard or shoe, produces 1. Remove the battery, place the saw on a stable surface, and inspect the blade for

• Blade wobbles or grinds

  Blade wobbles or grinds Blade setup, damage, shoe or guard contact, spindle, or bearing fault; use FM-07.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

공개 페이지에는 미리보기만 표시됩니다. 전체 수리 단계, 다이어그램 및 검증 절차를 다운로드하려면 전체 매뉴얼을 구매하세요.