FM-02: BATTERY가 도구 레일에 완전히 미끄러지지 않음

점검.

• Debris or a raised edge blocks a rail or contact channel
• Battery is misaligned or is not a compatible V20 interface
• Battery shell or tool rail support is swollen, cracked, or distorted
• Release latch or contact block is damaged and out of position

1. A compatible battery slides smoothly to the latched position, or the damaged insertion path remains out of service.

1. Dry-clean both rail paths and accessible contacts, then inspect the battery shell and tool foot for burrs, swelling, cracks, melting, or misalignment.
2. Approach the rails straight with a known-good compatible V20 battery and confirm whether it reaches the latch position smoothly.
3. If two sound packs bind at the same point, keep the tool unpowered and route the rail support, contact block, or housing damage to qualified service.
4. Stop pushing and withdraw the binding battery straight off the rails without twisting, striking, or levering it.

이것은 전체 수리 매뉴얼에 포함된 문제 해결 안내의 미리보기입니다.

• A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.

  A compatible V20 battery starts onto the tool rails but binds 1. Stop pushing and withdraw the binding battery straight off the rails without

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

공개 페이지에는 미리보기만 표시됩니다. 전체 수리 단계, 다이어그램 및 검증 절차를 다운로드하려면 전체 매뉴얼을 구매하세요.