修理ガイドを検索
ナレッジベース全体で修理ガイド、マニュアル、症状、エラーコードを検索できます。
A known-good compatible charger begins its normal charging cycle, but the cycle repeatedly stops, restarts, faults, or continues abnormally without reaching completion.
A hand-tightened bit slips, visibly wobbles, or its tip runs off center when the drill turns.
Smoke, flame, severe arcing, liquid, battery damage, melted contacts, exposed parts, or cracked structure.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
チャージャーはbatteryの挿入または取り外し中に揺れたり滑ったり、screwsから浮いたり引き離されたりするが、背面のキーホールスロットと筐体は目視で正常に見える。
The housing, handle, rails, nose, vents, lens, or accessory mount is cracked or loose.
充電器の緑色LEDが点滅せず、点灯し続けることもなく、batteryは放電したままです。
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
The tool or pack becomes unusually hot, or operation stops only after heat builds.
Bright repeated arcing or sharp crackling is visible at the rear vents while the tool runs.
CORDON D’ALIMENTATION OU PRISE ENDOMMAGÉE, LÂCHE, BRÛLÉE, OU CHAUDE
The tool starts and runs at no load, but stops abruptly on an ordinary fastener with no jam or twist.
A tool-free knob is frozen, cross-threaded, spins without effect, will not clamp the bar, or cannot hold the set tension.
The tool works until the pack, handle, or tool is bumped or shifted, then loses power.
The chain is hard to pull around the bar, the bar becomes unusually hot, or smoke appears without an electrical odor.
Smoke, burning odor, melting, liquid, active sparks, swelling, hissing, or severe pack damage is present.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
fm-3-5: CHARGING STARTS, THEN STOPS OR NEVER REACHES NORMAL COMPLETION
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-19: スロットが無傷でも壁掛け充電器がずれたり外れたりする場合
FM-09: FM-09 A 固定ビットがスリップ、揺れ、または無負荷で振れる
FM-16: FM-16 即時のBATTERY、電気、出力、または構造的危険
FM-27: FM-27 ツールまたはパックが過熱する、または熱によるシャットダウンが繰り返される
FM-31: FM-31 フットが曲がっている、ひび割れている、緩んでいる、または平らに座らない
FM-32: FM-32 集塵が弱いか集塵経路が詰まっている
FM-27: 工具に新しい研削音、ノック音、固着、または激しい振動がある
FM-28: 後部通気口で強いBRUSHアークまたはパチパチ音が発生する