修理ガイドを検索

ナレッジベース全体で修理ガイド、マニュアル、症状、エラーコードを検索できます。

マニュアル

症状

Narzędzie, akumulator lub ładowarka nagrzewa się nadmiernie lub ochrona wielokrotnie zatrzymuje pracę.
El paquete está hinchado, goteando, siseando, humeando, quemándose, aplastado, mojado o abierto.
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
Tool or battery becomes abnormally hot, smells hot, or repeats heat shutdown after light use.
標準の1/4インチパワーグルーブインパクトビットが六角ホルダーに挿入できず、ロックされず、リリースされない。
The accessory catches or stops in the material and the tool reacts sharply in the hand.
A hand-tightened bit slips, visibly wobbles, or its tip runs off center when the drill turns.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
Bright repeated arcing or sharp crackling is visible at the rear vents while the tool runs.
Obecne są dym, płomień, łuk elektryczny, ciecz, uszkodzony przewód, uszkodzenie battery lub odsłonięta struktura.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
方向セレクターは正常に動きデタントを保持するが、チャックは一方向でしか回らず、選択した矢印と逆に回転する。
The release button moves poorly or the pack remains trapped on the tool rails.

故障モード