FM-16: Pisau Terpasang Longgar, Bergoyang, Licin, Atau Tidak Berjalan Di Tengah

Setelah pemasangan, pisau dapat bergeser di spindle, terlihat berjalan ke samping, licin saat beban, atau tidak tetap terpusat meskipun motor berputar.

• Wrong arbor size, blade diameter, blade type, or damaged blade plate
• Outer washer is reversed, missing, dirty, or not seated
• Clamping screw is loose or clamp/spindle surfaces are damaged
• Blade is bent, cracked, or mounted in the wrong rotation direction

1. With the battery removed, the blade is rigid at the spindle, rotates by hand without lateral runout or guard contact, and remains secure in one controlled cut.

1. Release the trigger at the first wobble or slip, wait for a full stop, remove the battery, and do not make another powered cut.
2. Remove the blade and reject any bent, cracked, chipped, wrong-size, wrong-arbor, abrasive, or unsuitable blade.
3. Clean the spindle and clamp area dry, inspect both washers and the clamping screw, and confirm the large flat washer face is against the blade with the bev
4. Install a verified correct blade in the marked rotation direction and tighten firmly using the blade-lock and wrench procedure.
5. - Hand-turn and visually check clearance and runout - if looseness, slip, or off-center rotation remains, stop and route the spindle/clamp system for authoriz

This is a preview of the troubleshooting guidance included in the full repair manual.

• Bilah gergaji bundar pemotong kayu
• Sekrup penjepit bilah screw atau ring
• Gearcase, roda gigi, bantalan, atau spindle
• Kunci pisau, kunci pas pisau, klem screw, dan washer
• Pelindung pisau bawah, tuas tarik, pivot, dan pegas
• Gearcase, roda gigi, bantalan, dan spindel
• Pisau pemotong kayu 7-1/4 inci

• Pisau Terpasang Longgar, Bergoyang, Licin, Atau Tidak Berjalan Di Tengah

  Setelah pemasangan, pisau dapat bergeser di spindle, terlihat berjalan ke samping, licin saat beban, atau tidak tetap terpusat meskipun motor berputar.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Public pages show a preview only. Purchase the full manual to download complete repair steps, diagrams, and verification procedures.