Pelindung Bilah Bagian Bawah Tidak Menyusut atau Menutup dengan Bebas

Pelindung bawah macet, bergerak lambat, menggosok, tetap terbuka, atau gagal menutupi pisau.

• Sawdust or chips obstruct the guard path
• Guard is bent, cracked, or misassembled
• Retracting lever, pivot, or spring is damaged
• Blade or clamp parts rub the guard at some angles or depths
• Guard mechanism requires qualified adjustment or replacement

1. The lower guard moves freely and closes promptly over the blade.

1. Remove the battery and move the guard only with its retracting lever.
2. Check free travel and prompt spring closing through all bevel and depth settings.
3. Brush sawdust from the guard and clamp area, and confirm no blade or washer contact.
4. - If the guard is slow, damaged, missing, or will not close, do not use the saw - seek service.

This is a preview of the troubleshooting guidance included in the full repair manual.

• FM-07: Fm Dcs575 07

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Public pages show a preview only. Purchase the full manual to download complete repair steps, diagrams, and verification procedures.