FM-09: Bilah Meluncur, Goyang, atau Berjalan Tidak Benar

Pisau bergeser, berputar tidak pusat, menggosok pelindung, atau giginya berlawanan dengan panah pelindung.

• Blade is mounted in the wrong rotation direction
• Blade size or 5/8 inch arbor hole is incorrect
• Outer washer is reversed or the screw is loose
• Blade is bent, cracked, dirty, or below the required speed rating
• Spindle, clamp washer, bearing, or shoe is damaged

1. The blade is secure, turns true, and clears the guard at all settings.

1. Release the trigger immediately, let the blade stop, and remove the battery.
2. - Match teeth to the guard arrow - orient both washers correctly.
3. Clean the clamp faces, fit a straight correct blade, and tighten the screw clockwise with the wrench.
4. - Hand-turn and no-load test - if wobble, slip, or contact remains, stop and seek service.

This is a preview of the troubleshooting guidance included in the full repair manual.

• Sekrup screw pisau dan penjepit luar
• screw penjepit dan ring
• Mekanisme pelindung bawah
• Pelindung bawah dan tuas penyusut
• Mata gergaji bundar
• Poros, kotak roda gigi, dan pisau
• Motor, gearcase, atau spindle

• Bilah Meluncur, Goyang, atau Berjalan Tidak Benar

  Pisau bergeser, berputar tidak pusat, menggosok pelindung, atau giginya berlawanan dengan panah pelindung.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Public pages show a preview only. Purchase the full manual to download complete repair steps, diagrams, and verification procedures.