FM-07: BILAH BERGETAR, MENGGOSOK, BERGETAR, ATAU BERGERINDA

FM-07 PISAU BERGETAR, MENGGESER, BERGETAR, ATAU BERGEMUR

• Blade is bent, cracked, chipped, or wrong bore
• Blade, washer, or bolt is dirty or misassembled
• Blade bolt is loose
• Shoe or guard is bent into the blade path
• Spindle or bearing has side play or damage

1. A correct blade runs true, clears the guard and shoe, and produces no abnormal vibration or grinding.

1. Remove and reinstall the blade in the correct direction with clean mating surfaces, the correct outer washer, and the blade bolt securely tightened.
2. Rotate the blade by hand with the battery out and check for side rub, guard contact, a bent shoe, or spindle side play through a full revolution.
3. Perform a brief clear no-load test only if the hand check is normal; persistent wobble, grinding, or side play requires authorized spindle or bearing service.
4. Remove the battery, place the saw on a stable surface, and inspect the blade for bending, cracks, missing tips, wrong bore, or other damage; replace any suspect blade.

This is a preview of the troubleshooting guidance included in the full repair manual.

• Bilah gergaji bundar pemotong kayu

• Bilah berjalan tidak sejajar, menyentuh pelindung atau sepatu, menghasilkan getaran tidak biasa, atau membuat suara gerinda.

  Pisau berjalan tidak sejajar, menyentuh pelindung atau sepatu, menghasilkan 1. Lepaskan battery, letakkan gergaji di permukaan yang stabil, dan periksa pisau untuk

• Bilah bergetar atau menggerinda

  Bilah bergetar atau menggerinda Pengaturan bilah, kerusakan, kontak sepatu atau pelindung, spindel, atau kesalahan bantalan; gunakan FM-07.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Public pages show a preview only. Purchase the full manual to download complete repair steps, diagrams, and verification procedures.