FM-08: POTONGAN LAMBAT, MACET, BERHENTI, TERBAKAR, ATAU PECAH

Masalah kinerja pemotongan di mana bilah berputar tetapi gergaji memberi makan dengan buruk, macet, membakar kayu, atau terlalu banyak pecah selama potongan normal. Disarankan segera berhenti menggunakan untuk mencegah kerusakan atau cedera.

• Blade is dull, damaged, dirty, or wrong for wood
• Cut depth is excessive
• Kerf closes because the work is unsupported
• Depth or bevel lock is loose
• Saw is forced before full speed or against the cut line

1. The saw advances smoothly through supported wood with a clean kerf, normal motor sound, and no burning, stall, or excessive splintering.

1. Set depth so about one tooth projects below the work, lock depth and bevel, and support and clamp the work so the kerf cannot close on the blade.
2. Let the blade reach full speed, keep the shoe flat, and guide with gentle pressure on scrap; persistent overload or poor cutting routes to FM-05 or FM-07.
3. Release the trigger, hold the saw still until the blade stops, remove it from the cut only after the stop, and remove the battery.
4. Fit a clean sharp wood-cutting blade of the correct diameter, bore, and speed rating; remove sap buildup and reject damaged or abrasive wheels.

This is a preview of the troubleshooting guidance included in the full repair manual.

• Bilah, ring luar, dan bolt tangan kiri
• Sepatu, tuas kedalaman, dan skala kedalaman

• Bilah berputar, tetapi gergaji memberi makan dengan buruk, macet di alur, membakar kayu, serpihan berlebihan, atau kelebihan beban selama potongan biasa.

  Bilah berputar, tetapi gergaji memberi makan dengan buruk, macet di alur, membakar kayu, serpihan berlebihan, atau kelebihan beban selama potongan biasa. Lepaskan pelatuk, tahan gergaji tetap hingga bilah berhenti, lepaskan dari potongan hanya setelah berhenti, dan lepaskan {PART_NAME:0}.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Public pages show a preview only. Purchase the full manual to download complete repair steps, diagrams, and verification procedures.