Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Manuals

Symptoms

Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.
The running saw jumps, vibrates against the work, snags, or kicks backward or sideways.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
The reservoir contains oil but the chain stays dry, the primer gives no visible result, or the bar oil path remains dry.
एक सामान्य तापमान battery जो एक प्रमाणित संगत वेंटिलेटेड चार्जर में बैठा है, सामान्य स्थिर चार्ज के दौरान ज्ञात-चांग तुलनीय battery की तुलना में काफी अधिक गर्म हो जाता है, बिना धुआं, सूजन या पिघलने के।
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
După eliberarea declanșatorului, lama continuă să se miște vizibil mai mult decât normal.
Lama nu rămâne fixată
Obecne są dym, płomień, łuk elektryczny, ciecz, uszkodzony przewód, uszkodzenie battery lub odsłonięta struktura.
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
NO WORKLIGHT OR MOTOR RESPONSE
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.

Failure Modes