Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

The housing, handle, rails, nose, vents, lens, or accessory mount is cracked or loose.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The motor can be heard, but the front output remains still in both directions with the bit removed.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
360-डिग्री धूल पोर्ट जाम या ढीला है, या एक संगत नली/कपलर जुड़ा नहीं रहता।
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
वैकल्पिक डस्ट पोर्ट फिट नहीं होता, ढीला रहता है, जाम होता है, या खराब निकासी करता है
Charger green LED stays on
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
The quick-release collar binds, will not move fully forward, or stays forward after release.
Unit shuts off abruptly
एक चार्ज्ड पैक इंस्टॉल है, लेकिन ट्रिगर कोई वर्कलाइट, motor ध्वनि, या एंविल मूवमेंट उत्पन्न नहीं करता।
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
Dengan tuas penjepit berfungsi, bilah yang benar tidak dapat masuk sepenuhnya atau gagal uji tarik tangan.
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.

Failure Modes

part