Search repair guides
Find repair guides, manuals, symptoms, and error codes across the knowledge base.
With the bit removed, the driver makes continuous abnormal grinding, knocking, or scraping.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
墊轉動時出現異常驅動接觸聲
With no fastener load, the bare or correctly fitted output sounds harsh, binds, knocks, or shakes abnormally.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
Prosty bit pozostaje zaciskany, ale obraca się poza środek lub korpus uchwytu ma widoczne luzy.
Chuck clicks while tightening
The cool tool starts, then stops during a brief no-load test or light fastening task before heat builds.
הbattery לא מחליק במלואו לידית, לא ננעל, לא נשאר במקומו או לא משתחרר כראוי.
Charger green LED stays on
Unit shuts off abruptly
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
FM-19: Unormalt støy fra drivkontakt oppstår mens puten roterer
FM-15: Puten setter seg fast etter service på pute-assemblé
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-12: FM-12 ACCESSORY CAMS OUT, BINDS, OR TWISTS THE TOOL
FM-11: FM-11 מהירות או מומנט נמוכים עם הגדרה נכונה
FM-14: FM-14 המקדחה מרעידה או רועדת ללא עומס
FM-12: FM-12 הביט נתקע, המקדחה נתקעת או מסתובבת
FM-11: FM-11 刹车无法快速停止输出
FM-27: FM-27 הכלי או הסוללה מתחממים יתר על המידה, או כיבוי חום חוזר
FM-02: המארז לא יושב, ננעל או משתחרר
FM-04: FM-04 UNEALTĂ PORNEȘTE, APOI SE OPREȘTE CÂND ESTE RECE
FM-04: FM-04 המקדחה מפסיקה לפעול בזמן קרירה
FM-16: FM-16 סכנת BATTERY, מטען או כלי מיידית
FM-03: FM-03 BATTERY WILL NOT BEGIN OR COMPLETE CHARGING