BDCR20C

Model number: BDCR20C

Also known as: BD, Black and Decker, BDCR20C

• Black Decker Bdcr20c Repair Manual

• The battery will not insert fully, click into place, remain retained, or release normally.

  retained, or release normally. Support the saw and battery; stop forcing the pack. FM-02

• Clamp lever will not travel

  Clamp lever will not travel Remove the battery, clean the external lever area, and use FM-06.

• The cool saw starts, then stops during a brief no-load test or light cut before heat builds.

  or light cut before heat builds. FM-04

• Blade will not stay clamped

  Blade will not stay clamped Reject the wrong blade, seat it from the front, and use FM-07.

• Shoe is loose or bent

  Shoe is loose or bent Do not cut; inspect the pivot and structure with FM-09.

• The tool-free blade-clamp release lever will not reach full open or close securely.

  The tool-free blade-clamp release lever will not reach 1. Remove battery; let the blade cool before touching the clamp.

• With a secure known-good blade clear of the work, the saw has harsh sound, bind, or vibration.

  With a secure known-good blade clear of the work, the 1. Remove the battery and inspect blade, clamp, shoe, housing, vents,

• The charger will not begin or complete charging, or its green light does not behave normally.

  The charger will not begin or complete charging, or its Unplug the charger, remove the pack, and inspect both contact FM-03

• The blade leaves the line, flexes excessively, bends, or breaks during an otherwise controlled cut.

  The blade leaves the line, flexes excessively, bends, or 1. Release the trigger, wait for motion to stop, and remove the battery.

• The running saw jumps, vibrates against the work, snags, or kicks backward or sideways.

  The running saw jumps, vibrates against the work, 1. Release trigger; hold the saw until the blade stops.

• The saw, battery, or charger becomes abnormally hot or repeatedly shuts down after warming.

  The saw, battery, or charger becomes abnormally hot 1. Release trigger; remove battery; unplug charger; cool items separately.

• The clamp lever opens normally, but the installed blade remains trapped in the front clamp.

  The clamp lever opens normally, but the installed blade 1. Remove battery; let the blade cool.

• FM-09: FM-09 PIVOTING SHOE IS BENT, LOOSE, OR WILL NOT PIVOT

  The pivoting shoe is bent, loose, will not pivot freely, or does not sit firmly against the workpiece.

• FM-07 BLADE WILL NOT INSERT OR STAY RETAINED

  FM-07 BLADE WILL NOT INSERT OR STAY RETAINED

• FM-02: FM-02 BATTERY WILL NOT SEAT, LATCH, OR RELEASE

  The battery will not fully insert, latch, remain retained, or release normally in the saw.

• FM-10: FM-10 CUTTING OUTPUT IS LOW

  The blade strokes steadily but cuts slowly, stalls easily, or requires excessive feed force.

• FM-14: FM-14 NO-LOAD STROKE GRINDS, KNOCKS, BINDS, OR VIBRATES

  FM-14 NO-LOAD STROKE GRINDS, KNOCKS, BINDS, OR VIBRATES

• FM-04: FM-04 SAW STARTS, THEN CUTS OUT WHILE COOL

  FM-04 SAW STARTS, THEN CUTS OUT WHILE COOL

• FM-08: FM-08 INSTALLED BLADE WILL NOT RELEASE

  The clamp lever opens normally, but the installed blade remains trapped and will not release from the front clamp.

• FM-13: FM-13 ELECTRIC BRAKE DOES NOT STOP THE BLADE PROMPTLY

  After releasing the trigger, the blade continues to stroke noticeably longer than normal, indicating the electric brake is not stopping the blade promptly.

• FM-15: FM-15 TOOL, BATTERY, OR CHARGER OVERHEATS

  The tool, battery, or charger becomes abnormally hot or repeatedly shuts down after warming.

• FM-05: The lock-off or trigger sticks, will not move fully, starts unpredictably, or will not stop reliably.

  Remove the battery and stop cycling the controls.

• FM-06: FM-06 BLADE-CLAMP LEVER WILL NOT OPEN OR CLOSE

  The tool-free blade-clamp lever will not open or close fully, preventing blade changes or secure clamping.

• FM-11: FM-11 BLADE WANDERS, BENDS, OR BREAKS

  The blade wanders off the cut line, flexes excessively, bends, or breaks during normal cutting.