Search repair guides
Find repair guides, manuals, symptoms, and error codes across the knowledge base.
La salida de la herramienta es mucho menor con este paquete que con un paquete conocido bueno.
With no fastener load, the bare or correctly fitted output sounds harsh, binds, knocks, or shakes abnormally.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
Med ett säkert känt bra blad fritt från arbetsstycket, har sågen ett hårt ljud, fastnar eller vibrerar.
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
A known-good compatible charger begins its normal charging cycle, but the cycle repeatedly stops, restarts, faults, or continues abnormally without reaching completion.
The motor can be heard, but the front output remains still in both directions with the bit removed.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
THE DRILL WILL NOT START WITH A CHARGED KNOWN-GOOD BATTERY
Power drops in normal handling while the pack shifts or feels loose.
The tool works normally, but a fully charged pack empties much sooner on the same light task.
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
A proven compatible charger gives its normal full-charge indication, yet the removed battery shows little or no charge and can run a known-good low-load tool only briefly or not at all.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
After a normal full charge, the battery delivers usable power but substantially less work than a comparable known-good pack in the same tool, task and conditions.
Almacenado solo, el paquete pierde carga sustancial sin uso.
שני כלים תואמים ידועים טובים אינם מגיבים עם המארז הטעון.
FM-07: ההספק חלש תחת עומס מאומת
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-15: FM-15 BATTERY LOSES CHARGE RAPIDLY WHILE STORED DISCONNECTED
fm-3-2: CHARGE-STATUS INDICATOR GIVES NO RESPONSE AFTER A CONFIRMED FULL CHARGE
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-14: FM-14 RUNTIME IS MUCH SHORTER THAN A MATCHED KNOWN-GOOD BATTERY
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-02: המארז לא יושב, ננעל או משתחרר
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-06: HOT/COLD DELAY REMAINS AFTER THE PACK RETURNS TO ROOM TEMPERATURE
FM-10: Fm-10 תפוקת החיתוך נמוכה
FM-27: FM-27 הכלי או הסוללה מתחממים יתר על המידה, או כיבוי חום חוזר
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-11: FM-11 刹车无法快速停止输出
FM-04: FM-04 המקדחה מפסיקה לפעול בזמן קרירה
FM-06: FM-06 בקרת כיוון לא נבחרת
FM-11: FM-11 מהירות או מומנט נמוכים עם הגדרה נכונה
FM-16: FM-16 סכנת BATTERY, מטען או כלי מיידית
FM-05: אם המסור נשאר מת עם כוח מוכח ובקרות חופשיות, השאר את המארז סגור והפנה לשירות.
FM-07: Låst battery vil ikke frigjøres
Known-good charged compatible pack
Cool known-good Bosch 18V battery
Resirkuleringsrute for skadet litium
Cool known-good battery
Correct impact bit
Halbzoll-Schlag-Steckschlüssel
Impact socket
En rak rundskaftad borrbits
מטען battery מאושר
אריזת battery תואמת 12V MAX*
arbetsstycke
兼容的 battery
ביט נהג או מחזיק ביט
充电器和指示灯
可变速触发器
机载钻头架
模式或扭矩旋钮