Search repair guides
Find repair guides, manuals, symptoms, and error codes across the knowledge base.
The blade turns steadily, but wood cuts slowly, burns, or needs heavy feed pressure.
The blade pinches or stalls in the kerf, or the saw reacts backward during a cut.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
The saw or pack smokes, leaks, sparks, melts, smells burned, swells, vents, or hisses.
底座可以設定角度，但喺斜切桿鎖定後會移動或切割時漂移。
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The motor can be heard, but the front output remains still in both directions with the bit removed.
No-load operation is smooth, but the saw bounces, chatters, or vibrates as soon as cutting begins.
锁定0度斜切时，声音正常的刀片与底座不垂直。
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
motor同軸轉動，但鋸片喺墊圈上停滯或滑動，喺正常支撐切割時。
With the blade clear of material, the saw sounds slow, hunts, or repeatedly rises and falls in speed.
A suitable bag or vacuum collects little dust while the port remains secure and aimed.
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
裝咗正確嘅 battery，但按鎖定按鈕時同扳機冇產生任何 motor 反應。
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
fm-p21-b-2e87769a: The blade is damaged, wrong for wood, or fails the required
fm-p22-b-26b8fdae: The shaft lock is engaged, but the blade stud cannot be turned
FM-23: The lower guard resists the lift lever or cannot move fully
FM-13: The shaft lock is engaged, but the blade stud cannot be
fm-p29-b-beec475a: Valt djup förblir inte fast efter att djupspaken är
fm-p17-b-80df6c98: Support the battery, press the release, and slide it forward only to the secondary
FM-27: The selected depth will not remain fixed after the depth
FM-03: FM-03 BATTERY WILL NOT SLIDE IN, SEAT, OR LATCH
fm-p17-b-2db8b3a0: A compatible battery cannot travel fully into the housing or will
FM-24: FM-24 LOWER GUARD WILL NOT CLOSE PROMPTLY
FM-14: FM-14 AKSELSPÆRRE VIL IKKE ENGAGERE ELLER HOLDE
FM-31: FM-31 FOOT IS BENT, CRACKED, LOOSE, OR WILL NOT SIT FLAT
FM-01: FM-01 TOOL IS COMPLETELY DEAD - NO MOTOR RESPONSE
FM-04: The battery is latched in the saw and does not come
FM-32: FM-32 DUST EXTRACTION IS WEAK OR THE DUST PATH IS BLOCKED
FM-07: FM-07 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
FM-36: FM-36 SAW CHATTERS OR VIBRATES ONLY WHEN THE BLADE CONTACTS THE WORK
FM-34: FM-34 BLADE BINDS, STALLS, OR KICKS BACK IN THE CUT
FM-29: FM-29 斜切設定滑動或無法保持所選角度
FM-35: FM-35 BLADE ROTATES STEADILY BUT CUTTING IS SLOW, BURNS, OR REQUIRES FORCE
Known-good compatible Bosch or AMPShare battery
Motor, wiring, or electronics
Cut quality fault
Supplied wrench
Known-good high-power battery
Resirkuleringsrute for skadet litium
אריזת battery תואמת 12V MAX*
ביט נהג או מחזיק ביט
机载钻头架
模式或扭矩旋钮
Impact socket
兼容的 battery
arbetsstycke
En rak rundskaftad borrbits
מטען battery מאושר
充电器和指示灯
可变速触发器
Cool known-good Bosch 18V battery
Correct impact bit
Halbzoll-Schlag-Steckschlüssel