Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Symptoms

Motor sound is present, but the anvil and installed bit remain stationary.
סוללה טעונה מותקנת, אך ההדק אינו מפיק מנורת עבודה, צליל motor או תנועת סדן.
The accessory or fastener stops in the work and the tool stalls, twists, or cannot be withdrawn normally.
The accessory slips from the fastener, damages it, breaks it, or drives it beyond the intended seat.
הטריגר חוזר וה-motor נעצר, אך נורית ה-LED נשארת דלוקה הרבה מעבר לכ-20 שניות.
The bit rotates, but a real fastening load never produces the normal impact sound or pulses.
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
The charger shows charging or hot/cold delay, but the pack never reaches its normal charged indication.
The housing, handle, rails, nose, vents, lens, or accessory mount is cracked or loose.
The quick-release collar binds, will not move fully forward, or stays forward after release.
The tool or pack becomes unusually hot, or operation stops only after heat builds.
The release button moves poorly or the pack remains trapped on the tool rails.
Tombol maju/mundur tidak masuk, kunci tengah gagal, atau alat berjalan ke arah yang salah.
Pemicu menyalakan area kerja, tetapi motor tetap diam dan landasan tidak bergerak.
Bright repeated arcing or sharp crackling is visible at the rear vents while the tool runs.
The motor can be heard, but the front output remains still in both directions with the bit removed.
Spoušť se vrátí a napájení motor končí, ale sklíčidlo opakovaně setrvává mnohem déle než obvykle.
A compatible-looking pack will not slide fully into the handle, click, or stay retained.
A known-straight, fully retained 1/4-in. hex bit traces a visible circle at no load.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START

Failure Modes

part