Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Symptoms

חבילת הגליל נעצרת לפני מיקום הישיבה הרגיל או דורשת כוח חריג בכלי Bosch 12V Max תואם או מטען מאושר.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
冲击级1/2英寸套筒无法完全安装、保持或从方形输出驱动拉出。
The GBA18V40 starts onto the receiver rails but binds before reaching the normal seated and latched position.
BATTERY SEATS BUT WILL NOT STAY LATCHED
A room-temperature battery seated in a proven compatible ventilated charger becomes markedly hotter than a known-good comparable battery during a normal stationary charge, without smoke, swelling or melting.
After a normal full charge, the battery loses a large amount of indicated charge or usable low-load runtime while stored by itself in a cool, dry place.
The battery is cool and dry but the outer shell is cracked, split, punctured, missing a piece, or open at a seam, with no smoke, liquid, swelling, odor or dangerous heat.
כאשר האריזה מוסרת וקרה, אחד או יותר ממגעי הכוח, האות או הטמפרטורה הנגישים מעוקלים, דחוסים, מחוררים, רופפים או מחלידים, ללא חום פעיל, עשן, נוזל או התכה.
The battery shows a credible high charge or has just completed a proven charge, remains fully latched and still gives no response in a known-good compatible tool while stationary.
One or more green charge-status segments stay on, stay missing, or report an implausible level even though the battery charges and delivers normal low-load runtime.
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
A known-good compatible charger begins its normal charging cycle, but the cycle repeatedly stops, restarts, faults, or continues abnormally without reaching completion.
Il grilletto si blocca, il trapano continua a girare o la velocità a vuoto salta invece di variare dolcemente.
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
The cool dry battery shell appears closed, but a new loose rattle, clunk or shifting movement is heard inside after a drop or impact, with no swelling, liquid, smoke, odor or heat.
The pack starts and runs a known-good compatible tool at no load, but output stops promptly during an ordinary matched task that a known-good battery completes.
The cool dry pack has a visibly cracked, missing, loose or distorted rail, release button, latch feature or molded support, whether or not insertion has been attempted.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
A compatible charger continues to report its temperature-delay state after the battery has stabilized at room temperature and the charger works normally with another compatible battery.

Failure Modes

part