FM-06: MOTOR פועל אך הלהב לא מסתובב

FM-06 MOTOR פועל אך הלהב לא מסתובב

• Blade bolt or outer washer is loose or assembled wrong
• Blade is not seated on the spindle
• Blade bolt or washer is damaged
• Gear train or spindle has stripped or broken
• Spindle lock damage is interfering with the drive

1. The securely mounted blade follows the spindle immediately and runs without slipping.

1. Inspect blade seating, rotation direction, outer washer, and the left-hand blade bolt; engage the spindle lock only while stopped and tighten the bolt counterclockwise.
2. With the battery removed, rotate the blade gently by hand and verify the spindle turns with it without clamp slip, grinding, or abnormal free play.
3. If the motor runs but the correctly clamped spindle or blade still does not drive, stop testing and have the gear train, spindle, and lock serviced.
4. Release the trigger, wait for all motion to stop, remove the battery, and do not run the saw again until the blade drive is checked.

This is a preview of the troubleshooting guidance included in the full repair manual.

• Motor פועל אך הלהב לא מסתובב

  Motor פועל אך הלהב לא מסתובב תקלה במחזיק הלהב, הילוכים או הנעת הציר; השתמש ב-FM-06.

• ניתן לשמוע את ה-motor פועל, אך הלהב נשאר במקום, מתחיל באיחור, או מחליק במקום לעקוב אחרי ה-motor.

  ניתן לשמוע את motor פועל, אך הלהב נשאר במקום,

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Public pages show a preview only. Purchase the full manual to download complete repair steps, diagrams, and verification procedures.