failure mode
FM-22: El ángulo de bisel no se ajusta, bloquea, mantiene o lee correctamente
La base no se inclina a través del rango previsto, la palanca de bisel no se bloquea, el ángulo se desliza durante un corte o el puntero/cuadrante no da un ángulo repetible.
Resumen de diagnóstico
La base no se inclina a través del rango previsto, la palanca de bisel no se bloquea, el ángulo se desliza durante un corte o el puntero/cuadrante no da un ángulo repetible.
Causas probables
- Sawdust is packed at the pivot, quadrant, pointer, or lever
- Lever is loose, stripped, cracked, or incorrectly positioned
- Shoe, pivot, quadrant, or pointer is bent or worn
- Zero calibration or angle reading is being confused with a general locking failure
Comprobaciones rápidas
- The shoe sets within its range, locks firmly without movement, and produces a repeatable verified bevel angle.
Vista previa de reparación
- Remove the battery and set the saw on a stable surface before touching the bevel lever or shoe.
- Clean the exposed pivot, quadrant, pointer, and lever dry, then inspect for cracks, bend, missing hardware, or a lever that cannot clamp.
- Loosen the lever counterclockwise, tilt the shoe to the desired marked angle within 0-57 degrees, and retighten the lever clockwise firmly.
- - Check for movement by hand and confirm the angle with a gauge or a controlled scrap cut - use FM-21 only for a zero-degree calibration error.
- If the shoe cannot move, lock, hold, or read repeatably, keep the saw out of service for authorized lever, pivot, quadrant, pointer, and shoe repair.
Esta es una vista previa de la guía de solución de problemas incluida en el manual de reparación completo.
Soluciones habituales
- Palanca de bisel, cuadrante, indicador y calibración cero
- Zapato y pivotes estructurales
Síntomas relacionados
El ángulo de bisel no se ajusta, bloquea, mantiene o lee correctamente
La base no se inclina a través del rango previsto, la palanca de bisel no se bloquea, el ángulo se desliza durante un corte o el puntero/cuadrante no da un ángulo repetible.
Incluido en el manual completo
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Las páginas públicas muestran solo una vista previa. Compra el manual completo para descargar los pasos de reparación, diagramas y procedimientos de verificación completos.