symptom
Motor runs but blade stays still
Motor runs but blade stays still Blade clamp, gear, or spindle drive fault; use FM-06.
What this symptom means
Motor runs but blade stays still Blade clamp, gear, or spindle drive fault; use FM-06.
Related failure modes
Included in the full manual
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Public pages show a preview only. Purchase the full manual to download complete repair steps, diagrams, and verification procedures.
Related symptoms and error codes
Related models
Common symptoms
- Saw cuts out under load
- Blade wobbles or grinds
- The blade turns, but the saw feeds poorly, stalls in the kerf, burns the wood, splinters excessively, or overloads during an ordinary cut.
- The saw suddenly lifts, jumps toward the operator, climbs out of the kerf, or walks backward as the blade pinches or twists.
- The blade starts during battery insertion, the trigger remains stuck, or releasing the trigger does not de-energize the saw.
- The saw starts normally but stops, pulses, or loses power during a cut, especially when pushed or when the battery is moved.
- The motor can be heard running, but the blade remains still, starts late, or slips instead of tracking the motor.
- The blade runs off-center, touches the guard or shoe, produces unusual vibration, or makes a grinding sound.