Den nedre klingebeskyttelse trækker ikke tilbage eller lukker frit

Den nedre beskyttelse binder, bevæger sig langsomt, gnider, forbliver åben eller dækker ikke klingen.

• Sawdust or chips obstruct the guard path
• Guard is bent, cracked, or misassembled
• Retracting lever, pivot, or spring is damaged
• Blade or clamp parts rub the guard at some angles or depths
• Guard mechanism requires qualified adjustment or replacement

1. The lower guard moves freely and closes promptly over the blade.

1. Remove the battery and move the guard only with its retracting lever.
2. Check free travel and prompt spring closing through all bevel and depth settings.
3. Brush sawdust from the guard and clamp area, and confirm no blade or washer contact.
4. - If the guard is slow, damaged, missing, or will not close, do not use the saw - seek service.

Dette er en forhåndsvisning af fejlfindingvejledningen, der er inkluderet i den fulde reparationsmanual.

• FM-07: Fm Dcs575 07

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentlige sider viser kun en forhåndsvisning. Køb den fulde manual for at downloade komplette reparationstrin, diagrammer og verifikationsprocedurer.